dsf

StoneLux

Stone Effect Paint & Repair Products


Inglenook Fireside

  • Stonelux® Inglenook Fireside
  • Inglenook Fireside
  • Inglenook Fireside
  • Inglenook Fireside

Transform your Inglenook recess into a stunning stone focal point with StoneLux Inglenook Fireside.

A water-based stone effect paint which has been specially formulated for use on the walls or recess next to a fireplace. Our unique and exclusive ground stone formulation provies a hard-wearing , breathable, stone effect finish that looks and feels like natural stone, at a fraction of the cost.

  • Quick and easy to use. All instructions are on the tin. No fuss, no mess.
  • Comfortably withstands temperatures up to around 70-80℃.
  • An authentic finish that really does look and feel like natural stone.
  • Environmentally friendly - Low VOC
StoneLux Inglenook Fireside is an ideal and extremely cost effecive alternative to replacing an existing fireplace, back panel or hearth. Also suitable for commercial use.


 

Available Colours



Please note: Colours displayed on screen may vary from the colour of the stone paints due your individual screen settings. We recommend you request a free colour chart by calling us on 01405 720281
 

Further Information

Suitable Materials

  • Wood & Wood Finishes
  • Marble
  • Plaster
  • Masonry & Brickwork
  • Granite
  • MDF
  • Stone
  • Tiles
  • Resin
  • Concrete
  • Pre-Painted Surfaces

Properties

Drying Time: In normal drying conditions allow a minimum of hours drying time between coats. Drying time can be reduced by circulating warm air around the painted surface. Completely cured within 72 hours under normal conditions.
Composition: Water-based
Coverage: 1 litre will complete (with the recommended 3 coats) an area approximately 2.5 meters squared. Coverage can vary depending on the condition and porosity of the substrate.
VOC Content: Minimal VOC content. This product contains max 6g/l VOC.
 

Application

By Brush

  1. Stir thoroughly before application. To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and lacquered surfaces.
  2. Using a natural soft bristled brush, apply an even, full, coat of Primer in the correct shade, to all surfaces. Allow 1-3 hours to dry depending on conditions. A second coat of primer can be applied where there is a significant colour change.
  3. Using a natural soft bristled brush, lay an even, thin coat of StoneLux onto the surface. Do not over brush. Apply a MIMIMUM of 3 coats, allowing 1 - 3 hours drying time between coats, depending on conditions. If brush strokes remain, finish with light brush strokes or stippling. Fully cured in 72 hours.

By Spray

  1. Stir thoroughly before application. To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and lacquered surfaces.
  2. Using a gravity fed spray gun, apply an even, full, coat of primer in the correct shade to all surfaces. Wet film thickness should be between 150 and 200µm with no over coating on corners or joints. Allow 1 to 3 hours drying time, depending on conditions.
  3. Using a gravity fed spray gun, apply 2 - 3 even, full, coat of StoneLux to all surfaces. Wet film thickness should be between 300 and 500µm with no over coating on corners or joints. Allow 2-3 hours to dry, depending on conditions. Fully cured in 72 hours.
  • Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish).
  • If using a gravity fed gun, use a nozzle size between 1.8-2.5mm using a texture gun, use a nozzle size between 2-5mm.
  • If necessary, StoneLux can be diluted, using no more than 20% water.
 
 

Downloads

Technical Data Sheet:

Material Safety Data Sheet:

Inglenook Fireside Product Leaflet:

Application Guide:

 


Related Products

Placeholder imageInglenook Fireside
Placeholder imagePrimer & Basecoat
Placeholder imageInterior Stone Coating
Placeholder imageStoneLux Brushes
Placeholder imageBrick Repair Filler
Placeholder imageColour Charts