A textured brick coating which changes the colour of bricks making it the ideal solution for tying in new brickwork with a building's existing bricks, addressing patchy brickwork, enhancing a building's architectural features or carrying out brick repairs.
Select your chosen colour & tin size below.
*Excludes Northern Ireland, Scotish Highlands, Channel Islands, & Isle of Man.
The colour and finish of bricks can vary dramatically from one foundry to another, and with many bricks no longer available, matching new bricks with existing ones can be a difficult and laborious task. Extending an existing brick building, or carrying out repair works, will often result in mis-matched bricks or unappealing patchy brickwork.
StoneLux Brick Coat is a water-based, non-toxic, textured brick coating which changes the colour of bricks making it the ideal solution for tying in new brickwork with a building's existing bricks, addressing patchy brickwork, enhancing a building's architectural features or carrying out brick repairs. StoneLux Brick Coat changes the colour of bricks resulting in visually appealing masonry and an attractive building.
Wood & Wood Finishes, Marble, Plaster, Masonry & Brickwork, Granite, MDF, Stone, Tiles, Resin, Concrete, Pre-Painted Surfaces
1L, 2.5L, 5L, 10L, 20L
Brush, roller or spray. We recommend natural bristled economy paintbrushes for use with all Stonelux Paints.
Washable once cured. Clean brushes with water.
Coverage: 7.5 meters squared per 1 litre. Coverage can vary depending on the substrate.
VOC Content: LOV VOC CONTENT 0-0.29%. VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product(CatA/c):40g/l(2010) This product contains max 6g/l VOC.
Do not apply in rain, temperatures below 10°C or above 30°C or if exposure to these conditions is likely during curing time.
Prepare all surfaces well. Ensure the surface is clean, sound and dry. Repair any damage with a suitable filler.
Stir well before use. Apply using an economy natural bristled brush or a roller. Apply a MINIMUM of 3 even coats. Avoid overspreading. Leave 2-3 hours drying time between coats. Do not over brush/roll. If brush marks remain, finish with stippling before final coat dries.
Stir well before use. Apply 2-3 full and even coats to the surface. Wet film thickness should be between 300 and 500µm. Do not over coat on corners or joints. Allow 2-3 hours drying time between coats. Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish). Nozzle size: 1.8-2.5mm (gravity fed gun) or 2-5mm (texture gun). Paint can be diluted using no more than 20% water.